Yamaha RX-V567 사용자 가이드

■

If you do not operate this unit or use the remote control for an 
extended period of time, it will automatically go into standby mode 
(Auto Power Down function). This function’s default setting is 
“Off.” When you want to enable this function, set the amount of 
time to pass before this unit will enter standby.

■

Sets the brightness of the front panel display. Lowering the setting 
dims the display. 

■

Adjusts the top and bottom positions of menus displayed on the 
TV. 
Increase this value to raise the menu, or decrease the value to lower 
it.

You can set the parameters for the sound field programs (

Prohibits setting changes to prevent careless changes being made 
to the settings on Setup menu.

AutoPowerDown

Off (Default)

Auto Power Down function is disabled.

4hours

Goes into standby mode, when you have not operated 

this unit for four hours.

8hours

Goes into standby mode, when you have not operated 

this unit for eight hours.

12hours

Goes into standby mode, when you have not operated 

this unit for twelve hours.

This unit starts a countdown of 30 seconds before entering the 
standby mode. Pressing any key of the remote control during the 
countdown cancels entering the standby mode and reset the 
timer.

Dimmer

-4 to 0

0

OSD Shift

-5 to 0 to +5

0

Off (Default)

Settings are not protected.

On

Prohibits changes to the settings on Setup menu until 

it is returned to “Off.” 

While set to “On,” the unit displays “Memory 

Guard!” when an attempt is made to change the 

settings.

When this parameter is switched to “On,” “

” appears while 

the Setup menu is displayed on the TV.

MOVIE

SUR.

;

DolbyPLIIxMovie

.Sci-Fi

DSPLevel

;;;;;;;;

0dB

Initialize

[]/[]:Select

p

[

;

MemoryGuard

Off>On

[RETURN]:Return

[

p]/[[]:Select

G

G