Yamaha RX-V1065 사용자 가이드

■ Parameter for Straight Enhancer and 7ch 

Adjusts the Compressed Music Enhancer effect level. 
When the high-frequency signals of the source is 
emphasized too much, set the effect level to “Low”. To 
reduce the effect, set this parameter to “Low”.

You can customize decoder effects by setting the 
following parameters. For details about the types of 
decoders, see “Surround decode mode” (page 27).

■ Parameter for PLIIx Music and PLII Music

Adjusts the soundscape of the front sound field. Sends 
stereo signals to the surround speakers as well as the front 
speakers for a wraparound effect.

Adjusts the difference in level between the front sound 
field and the surround sound field. You can adjust the 
difference in level created by the software being played 
back to obtain the preferred sound balance. The surround 
sound gets stronger as you make the value more negative 
and the front sound gets stronger as you make the value 
more positive.

You can spread the center sound toward left and right 
according to your preference. Set this parameter to 0 for 
outputting the center sound from the center speaker only, 
or to 7 for outputting it from the front left/right speaker.

■ Parameter for Neo:6 Music

Adjusts the front left and right channel output relative to 
the center channel to make the center channel more or less 
dominant as necessary.

Choices:  High*, Low

Choices:  Off*, On

Adjustable range:  –3 to STD* to +3

Adjustable range:  0 to 3* to 7

Adjustable range:  0.0 to 0.3* to 1.0