Yamaha RX-V1065 사용자 가이드

In the advanced setup menu, you can set basic operations 
of this unit, such as on and off of a bi-amp connection, or 
initialize user settings.

While holding down OSTRAIGHT on the 
front panel, press KMAIN ZONE ON/OFF.
Keep holding down OSTRAIGHT until 
“ADVANCED SETUP” appears on the front panel 
display.

Rotate the NPROGRAM selector to select 
the parameter you want to change.
The default setting are marked with “*”.

y

• Set values are placed in XXX of the following parameters on an 

actual display screen.

SP IMP. -XXX

Selects output impedance of this unit according to 
connected speakers. When you connect 4-ohm 
speakers to the FRONT speaker terminals, set “SP 
IMP.” to “6

ΩMIN.”.

REMOTE ID -XXX

Sets a remote control ID. When using multiple 
Yamaha AV receivers, you can operate them with a 
single remote control by setting the receiver IDs to 
the same setting.

SR PIN -XXX

Resets Parental lock cord when using SIRIUS 
Satellite tuner.

BI AMP - XXX

Switches on and off of bi-amp connection of main 
speakers. For bi-amp connection, see page 12.

SCENE IR -XXX

Selects whether or not to transmit the control signals 
to an external component connected to the REMOTE 
OUT jack on this unit when BD/DVD or CD SCENE 
function is selected.

MON.CHK - XXXX

Adds upscaling limitation on output signals to a video 
monitor connected to this unit via the HDMI OUT 
jack.

INIT-XXXXXXXXX

Initializes various settings stored in this unit. You can 
select an initialization method from the following.
DSP PARAM: All parameters of sound field 

programs

VIDEO

Video conversion settings (resolution/
aspect) in the Setup menu and the GUI 
display position

ALL

All

CANCEL

Cancellation of initialization

Press OSTRAIGHT repeatedly to change 
the selected parameter setting.
To change other settings, repeat steps 3 and 4.

Press KMAIN ZONE ON/OFF to set this 
unit to standby.
The settings you made are reflected next time you 
turn on this unit.

You can check the firmware of this unit and update the 
firmware using the USB port on the front panel.
Select the following parameter in step 3 above.

FIRM UPDATE

Updates the firmware of this unit. To update the firmware, 
select “FIRM UPDATE” and then press OSTRAIGHT.

• Do not use this feature unless you need to update the firmware.
• Be sure to read information supplied with updates before updating the 

firmware.

VERXXX.XXX.XXX

Displays the firmware of this unit.

Two IDs are provided for the remote control of this unit. If 
another Yamaha amplifier is in the same room, setting a 
different remote control ID to this unit prevents unwanted 
operation of the other amplifier.

“ID1” is set for both the main unit and remote control by 
default. If you have changed the remote control ID, make 
sure that you select the same ID for the main unit in the 
the advanced setup menu.

Press oCODE SET on the remote control 
using a pointed object such as the tip of a 
ballpoint pen.
nTRANSMIT blinks twice.

Press iON SCREEN.

Choices:  6

ΩMIN, 8ΩMIN*

Choices:  ID1*, ID2

Choices:  RESET, CANCEL*

Choices:  ON, OFF*

Choices:  ON*, OFF

Choices:  YES*, SKIP

ADVANCEDSETUP

Choices:  DSP PARAM, VIDEO, ALL, CANCEL*