Yamaha RX-V567 사용자 가이드

Selects a surround decoder to be used with a sound field program 
in the MOVIE category.

J1

Change the effect level (level of the sound field effect to be added). 
You can adjust the level of the sound field effect while checking the 
sound effect.

Automatically bypasses the DSP circuit and tone control circuit 
depending on the condition of tone control etc., when an analog 
sound source is played back. You can enjoy a higher quality sound.

Adjusts the center channel volume.

J2

Adjusts the volume of the surround L channel.

J2

Adjusts the volume of the surround R channel.

J2

Adjusts the volume of the surround back channel.

J2

Adjusts the effect level of the compressed music enhancer mode.

SUR.

Dolby PLIIxMovie 
(

Dolby PLII Movie)

Selects the Dolby Pro Logic IIx Movie (or 

Dolby Pro Logic II Movie) decoder. 

Neo:6 Cinema

Selects the Neo:6 (Cinema) decoder.

DSP Level

-6 dB to 0 dB to +3 dB

0 dB

Adjust “DSP Level” as follows:

• The effect sound is too soft.

• There are no differences between effects of the sound field 

programs. 
→ Increase the effect level.

• The sound is dull.

• The sound field effect is added too much. 

→ Reduce the effect level.

Direct

Auto (Default)

Outputs sound by bypassing the DSP circuit and tone 

control circuit when both tone controls of “Bass” and 

“Treble” are set to 0dB.

Off

Does not bypass the DSP circuit and tone control 

circuit.

CT Level

0 to 100%

100%

SL Level

0 to 100%

100%

SR Level

0 to 100%

100%

SB Level

0 to 100%

35% (7.1-channel configuration)

50% (6.1-channel configuration)

Effect Level

High (Default)

Standard effect.

Low

Sets when the high-frequency signals of the source are 

emphasized excessively.

J

Surround decoders cannot be changed when used with the following MOVIE 
sound field programs.
• Mono Movie
• Sports
• Action Game
• Roleplaying Game

J

Not displayed when speakers are set to be inactive.