Yamaha mark iii 사용자 가이드

Engaging the Silent
System

Engaging the Silent system is very simple. Follow

the procedure below.

To select Quiet mode, simply press
the [SILENT] button on the Silent
Control Box.

The SILENT ON indicator lights.

You can hear the sound of the digital piano

through the built-in speakers.

To select Silent mode, connect
stereo headphones to either of
two HEADPHONES jacks on the
Silent Control Box.

You can hear the sound of the digital piano

through the headphones.

Two sets of headphones can be connected

simultaneously.  In this case, the two

headphones  should be of the same model.

In normal mode, the volume of the piano could be

adjusted only down to the softest level that the

acoustic piano can play.

In Silent or Quiet mode, you can adjust the

volume of the digital piano as desired, to a level

softer than what is possible on the acoustic piano.

Volume is adjusted using the VOLUME knob on

the Silent Control Box.  The standard volume

level is roughly the three o’clock position. At this

setting, the volume level of the digital piano is

approximately the same as what the acoustic

piano would be in normal mode.

Turn the knob clockwise to increase and

counterclockwise to decrease the volume.

Turning the knob fully counterclockwise mutes

the sound of the digital piano.

Note: You can also adjust the volume on the Control

Unit to a certain extent within the normal

volume range of the piano.

Note: Make sure the VOLUME knob on the

Amplifier is set to a level at which sound is

produced.  If the volume knob on the

Amplifier is turned fully counterclockwise, no

sound may be produced even when you use

the VOLUME knob on the Silent Control Box

to adjust volume

PLAY/PAUSE

STOP

REC

SONG SELECT

/REV ¥ FWD

PART

ENTER

VOICE

FUN

STANDBY
ON

SELECT

DRIVE

SILENT

ON

HEADPHONES

REVERB

VOLUME

SILENT

ON

VOLUME

HEADP

SILENT

ON

HEADPHONES

VOLUME