Yamaha mark iii 사용자 가이드

English Chapter 14: Using the PianoSmar

t Featur

PianoSmart Recording

During recording, songs can be recorded as MIDI

data while a CD is being played back. You can

record your song onto Memory Disks or a floppy

disk.

When Recording a New Song

Specify a disk.

Use the disk in SMF format.

Note: If you are recording to a floppy disk,

make sure that the disk’s erasure

protection tab is set to “unprotected”.

☛ Unformatted disks must be formatted before

use with the Disklavier. See “Formatting

Disks” on page 17 in the Advanced

Operation Manual.

If an E-SEQ type disk is used, the

following display appears when you

attempt to start recording, and

recording is disabled. Use the disk in

the SMF format.

Use the [SELECT] buttons to select
the number of the memory disk
that will serve as the recording
destination.

A new song number is created for the new

recording. For example, if the last song to

be recorded was No.6, then the new song

will be No.7.

Specify the CD that is to be
recorded.

When you insert CD into the CD drive, the

letter “Cd” automatically appear on the left

side of the display.

Press [SONG SELECT] to select the
song on the CD that is to be
recorded.

Press [REC] to engage the Record
Standby mode.

The REC indicator lights and the

PLAY/PAUSE indicator flashes.

The currently selected CD song is recorded.

Press [PLAY/PAUSE] and recording
will begin.

The PLAY/PAUSE indicator stops flashing.

Start playing your song with the CD sound.

The following display appears.

“PS” indicates PianoSmart.

When you finish playing, press
[STOP].

When Re-recording

Re-recording the Same Song on the
Same CD