Yamaha YST-SW012 사용자 매뉴얼

 

1

 

Lights up in GREEN when the 

 

switch 

(

 

2

 

) is turned 

 

; turns off when the 

 

switch is turned OFF.

 

2

 

Press this switch to the 

 

 position to turn on 

the power to the subwoofer. When the power of 
the subwoofer is on, the power indicator (

 

1

 

) on 

the rear panel lights up in green. Press this 
switch again to set it to the OFF position to turn 
off the power of the subwoofer.

 

3

 

Adjusts the volume level. Turn the control 
clockwise to increase the volume, and counter-
clockwise to decrease the volume.

 

4

 

Input terminal for line level signals from the 
amplifier.

 

Before you use the subwoofer, first adjust the vol-
ume balance between the subwoofer and the front 
speakers by following the procedure below.

 

Set the 

 

control to minimum (0).

 

Turn on the power to all other components.

 

Press the 

 

switch to the 

 

 position.

The power indicator on the rear panel lights up 
in green.

 

Play a source that contains bass signal. Adjust 
the amplifier’s volume control to the desired lis-
tening level.

 

Rotate the 

 

 control gradually to adjust 

the volume balance between the subwoofer and 
the other speakers. To enjoy natural bass sound, 
keep the subwoofer volume at a level where it is 
barely distinguishable from other speakers.

 

Adjust the volume of the entire sound system 
using the amplifier’s volume control.

 

 It is recommended to set the 

 

 control about in the middle 

position when using in a multi channel 
home theater system.

3

1

4

2