Zhone 1740 shdsl 사용자 설명서

STEP 4: Click Save & Reboot on the Basic menu bar to save your settings.  

 

 

3.2.3 PPPoE 

When a VC is set in the PPPoA, the router will auto-detect the Authentication code (PAP or CHAP). The 
NAPT and DHCP server functions will be enabled automatically. 

STEP 1: Click WAN Setup on the Basic menu bar and enter the following parameters to set up the 

PPPoE. 

VPI 

Enter a value for the vitual path identifier 

VCI  

Enter a value for the virtual channel identifier 

LLCEncapsulation: 

With LLC encapsulation, a link control header is added to the 
Ethernet packet that identifies the protocol type (Ethernet). This 
allows multiple protocols to be transmitted over the ATM Virtual 
Circuit. 

VC Multiplexing: 

With VC Multiplexing, no link control header is needed as the ATM 
Virtual Circuit is assumed to be carrying a single protocol. 

Enable NAPT 

Selecting Enabling NAPT will enable Network Port Address 
Translation on the WAN interface.  

User Name/Password  These two fields are used for remote subscriber to log on for 

Internet access. 

Mode 

Direct and Auto. If the mode is set to Auto, the PPPoE negotiation 
automatically starts when the system identifies any traffic required 
to be transferred on the link. When DIRECT is selected the PPPoE 
negotiation is started manually.  

22                                                                                      July 2004                                                                 1740-A2-GB20-00