Zhone 2000 사용자 설명서

- 147 -

1. To configure the IAD for a specific gateway, type the option 

corresponding with one of the gateways listed in the menu.

2. The IAD configures the voice gateway for the selected gateway and 

displays the AAL2/LES Manual Configuration menu. Included in the 
settings is a message indicating the IAD will be configured for the 
selected gateway after reset.

3. Reset the IAD (page

) when you finish voice path configuration.

Type C to display the AAL2/LES Manual Configuration menu (current 
settings eliminated from this example): 

Type the option for the command to execute and proceed to the 
appropriate section.

************************************

AAL2/LES Configuration

************************************

AAL2/LES is MANUALLY configured.
Port Control (bit mapping) is 0x00000000
CAS signaling is GR303-ABCD.
CAS refreshing is DISABLED.
Idle CAS refreshing is DISABLED.
Max. CPS-SDU size is 0 octets.
"Combined use" timer is 0 millisecond(s).
User state control (USC) is DISABLED.
Dialled digit (outband) is DISABLED.

C. -MANUAL- Configuration
A. Accelerated Networks
L. Lucent
G. General Bandwidth
M. MetaSwitch
Z. Zhone
T. TdSoft

************************************

AAL2/LES Manual Configuration

************************************

P. Enable/Disable Ports
R. Set CAS refreshing rate
I. Enable/Disable idle CAS refreshing
S. Change Max. CPS-SDU Size; 45/64 Octets
T. Set "Combine Use" Timer
U. Enable/Disable User State Control
D. Enable/Disable Dialed Digit
A. Manual ATM Pace Control