Zhone 5100 참조 매뉴얼

CHAPTER 3
Interfaces

You can set the WAN IP address as the NAT public IP address by issuing the set nat 

outside_interface command. You need to save any other IP changes before issuing this 

command. 
Syntax: set nat outside_interface <wan | loopback>
Example:

In this example, the outside WAN NAT entry becomes the outside WAN address.

You can view all of the static IP NAT entries that you have created by issuing the show nat 

static_map command.
Syntax: show nat static_map
Example:

In this example, the NAT static map from 10.10.10.2 to the WAN IP address 205.176.94.14 is 

shown.

VPacket# set nat outside_interface wan

Warning: All unsaved NAT configuration items and all active

data connections through NAT will be lost

Do you want to continue (y|n) [n]? y

VPacket#

VPacket# show nat static_map

Number of Static Mappings defined: 1

Inside Address -- Outside Address

10.10.10.2        205.176.94.14

VPacket#