Zhone 5100 참조 매뉴얼
DHCP commands
Vpacket 5100/6100 Series Reference Manual
107
Figure 4-2. DHCP example
When employing Ethernet IP multinetting, only one network can use the DHCP feature.
When employing Ethernet IP multinetting, only one network can use the DHCP feature.
Figure 4-3 shows a 5100/6100 VDR in an Ethernet multinetted environment with DHCP set up
on Network 1. The IP addresses for Network 1 are segmented into two subnets: 10.10.10.0 and
10.10.10.128. The IP address range for the 10.10.10.0 subnet is 10.10.10.1 to 10.10.10.126 with
10.10.10.127 as the broadcast address for DHCP static hosts. For subnet 10.10.10.128, the IP
address range is 10.10.10.129 to 10.10.10.253. IP address 10.10.10.254 is assigned to the 5100/
6100 VDR as an Ethernet LAN address and 10.10.10.255 is the DHCP broadcast address.
Network 2 is a PC host with an IP address of 13.13.13.1 on the network 13.13.13.0. The default
Network 2 is a PC host with an IP address of 13.13.13.1 on the network 13.13.13.0. The default
gateway for Network 2 is 13.13.13.254.
Network 3 consists of two PC hosts with IP addresses 15.15.15.1 and 15.15.15 2. They share the
Network 3 consists of two PC hosts with IP addresses 15.15.15.1 and 15.15.15 2. They share the
default gateway 15.15.15.254.
Vpacket 6100 VDR
Ethernet interface enabled as "server"
IP address: 192.168.101.1
Switch
Web server
"VPWebServer"
10.10.10.2
"VPWebServer"
10.10.10.2
Note: static hosts can be web servers,
FTP servers, or mail servers; a server where the
IP address always remains the same
FTP servers, or mail servers; a server where the
IP address always remains the same
PC (DHCP client)
6100 VDR allocates
a dynamic IP address
from a range
a dynamic IP address
from a range
E-mail server
IP address: 10.10.10.1
IP address: 10.10.10.1
FTP server
IP address: 10.10.10.3
IP address: 10.10.10.3