Zhone 5100 참조 매뉴얼
CHAPTER 4
IP services
IP services
114
Vpacket 5100/6100 Series Reference Manual
Viewing DHCP pool information
You can view the configured DHCP lease information for a DHCP pool by issuing the show
dhcp pool command.
Syntax: show dhcp pool [pool]
Argument:
Syntax: show dhcp pool [pool]
Argument:
pool
(optional) name of the DHCP pool you want to view
Example:
In this example, all of the configured DHCP parameters for the pool “vpacket” are shown.
Setting a DHCP static host
The static host functionality of DHCP is available for the server mode on the 5100/6100 VDR.
For example, the command set dhcp static_host VPWebServer creates a static host by that name
that you can associate with a MAC address so that a single IP address is associated with that name.
This feature is specifically for servers that must have a specific IP address for data exchange (i.e.,
E-mail server, web server, or FTP server).
Before you can set the parameters for a static host, you must first name the static host. You can
Before you can set the parameters for a static host, you must first name the static host. You can
set the name of a static host by issuing the set dhcp static_host command.
Syntax: set dhcp static_host <static host name>
Argument:
Syntax: set dhcp static_host <static host name>
Argument:
static host name
up to 127 ASCII characters in length
VPacket# show dhcp pool vpacket
-------------------------------------------------------------------------
DHCP pool vpacket
Network Address / Mask 10.10.10.0 255.255.255.0
Domain Name
DNS Servers 209.119.23.6 10.10.10.4
Netbios Server 10.10.10.22
Netbios Node Type hybrid
Default Router 10.10.10.254
Default Lease day/hr/min 000/01/00
Maximum Lease day/hr/min 12/0/0
Ip Range Min 10.10.10.129 -- Max = 10.10.10.253
-------------------------------------------------------------------------
VPacket#