Zhone 5100 참조 매뉴얼

CHAPTER 4
IP services

Example:

In this example, the DHCP information includes:
•

DHCP host, which is VPWebServer

•

MAC address, which is 00:00:11:77:77:77

•

IP address and subnet mask, which are 10.10.10.2 and 255.255.255.0

•

Domain name (no domain name is configured in this example)

•

DNS server IP addresses (none are configured in this example)

•

Configuration file, which is named file_xyz.dhcp in this example

•

Server address, which is 192.168.101.19 in this example

Static routing can be provisioned to force a particular route within a network environment. The 

following information is required for static routing setup:
•

a valid IP destination that is not already resolvable in the routing table

•

a subnet mask appropriate to the destination host/network installation

•

the IP address to use for the gateway to route traffic through

•

Number of hops as appropriate to the network; if this parameter is not set, it defaults to 1. 

The routes to be added must be unique within the network. For example, the IP address and the 

subnet mask should not match any other valid destination accessible in the routing table. If the 

VDR has an IP address of 192.168.0.1 with a subnet mask of 255.255.255.0, you can't add a route 

to 192.168.0.2 with any subnet mask because the 5100/6100 VDR already has a route for that 

host.
The route to the gateway must be resolvable to an interface of the 5100/6100 VDR.

VPacket# show dhcp static_host seahorseFTPsvr

------------------------------------------------------------------

DHCP host                 VPWebServer

Hardware Address          00:00:11:77:77:77

IP Address / Mask         10.10.10.2   255.255.255.0

Domain Name

DNS Servers

Configuration File        file_xyz.dhcp

Server                    192.168.101.19

-----------------------------------------------------------------