Zhone 5100 참조 매뉴얼

CHAPTER 4
IP services

You can view the SNMP trap destination table by issuing the show snmp trap destination 

command. This command displays the SNMP trap destinations by IP address and community 

name.
Syntax: show snmp trap destination
Example:

In this example, one SNMP trap destination is set to IP address 205.176.94.11 for port 8080. The 

community name is yellow_alarm.

Telnet is a supported application and you are able to customize the time-out value.

You can change the telnet time-out value for the current telnet session by issuing the set telnet 

timeout command.
Syntax: set telnet timeout < 1-255>
Argument:

1-255

the time-out value in minutes

Example:

In this example, the telnet session is now set to time out after 25 minutes of inactivity.

VPacket# show snmp trap destination

----------------------- SNMP TRAP DESTINATIONS -------------------

Number of destinations 0

IP Address       Port   Community Name

205.176.94.11    8080   yellow_alarm

------------------------------------------------------------------

VPacket# set telnet timeout 25

VPacket#