Zhone 5100 참조 매뉴얼
APPENDIX A
FTP loader commands
FTP loader commands
A-16
Vpacket 5100/6100 Series Reference Manual
Running RAM
You can run code in RAM by issuing the runram command. If the system is reset the
configuration changes made are lost.
Syntax: runram
Example:
Syntax: runram
Example:
In this example, the code file is run from the FTP server in the 5100/6100 VDR RAM.
Save config
You can save a configuration by issuing the save command.
Syntax: save
Example:
Syntax: save
Example:
In this example, configuration changes are saved.
Set commands
Set commands within the FTP loader place required elements within squared brackets at the main
menu level and within angled brackets at the second level.
Setting the system date
You can set the system date by issuing the set date command.
Syntax: set date [mm dd yyyy]
Example:
Syntax: set date [mm dd yyyy]
Example:
In this example, the date is set for June 7, 2002
FtpLoader(12)> runram
Verifying entire contents of software at address 0x00010000
verifyBinary: ERROR, bad magic number, got: 0x00000000
FtpLoader(13)>
FtpLoader(21)> save
FtpLoader(22)>
FtpLoader(4)> set date 06 07 2002
FtpLoader(5)>