Zhone 5100 참조 매뉴얼

In this example, first a software image named 

s020101

.bin is uploaded to a server and then a 

configuration file named config2.cfg is uploaded.

The set commands allow you to define parameter and system information. Many of the set 

commands are grouped within the chapters that they pertain to. System “set” commands are in 

this section.

You can choose to limit how long a console session remains active by issuing the set console 

timeout command. By default, an inactive console session times out after 10 minutes. After five 

minutes of inactivity, a message warning the user of the log out appears.
Syntax: set console timeout <minute(s)>
Argument:

minute(s)

enter a number half as great as the allowable limit of console inactivity; for 

example, to allow a 14 minute period of inactivity before a forced logout, enter 

the number 7; entering 0 allows an unlimited session

Example:

In this example, the console is set to time-out within a total of two minutes. At the half-life of the 

command, the system alerts the user to an impending forced logout due to inactivity.

Vpacket# set console timeout 0

Vpacket# set console timeout 1

Vpacket#

Vpacket#

This terminal has been idle for 1 minute(s).

It will be logged out if it remains idle for another 1 minute(s).

Vpacket#