Zhone 6382 사용자 설명서
3. Using the Web Interface
3-42
April
2005
6382-A2-GB20-00
Modem Test
The Modem Test is used to check whether your router is properly connected to the
WAN Network by running OAM F4 and F5 end-to-end and segment tests. The test
may take a few seconds to complete. To perform the test, select your connection
from the list, select a Test Type, and click on the Test button.
WAN Network by running OAM F4 and F5 end-to-end and segment tests. The test
may take a few seconds to complete. To perform the test, select your connection
from the list, select a Test Type, and click on the Test button.
Before running this test, make sure you have a valid DSL link; if the DSL link is not
connected, this test will always fail. Also, the DSLAM must support this feature.
Not all DSLAMs have OAM F4 and F5 support.
connected, this test will always fail. Also, the DSLAM must support this feature.
Not all DSLAMs have OAM F4 and F5 support.
Figure 3-37. Modem Test