Zenith tvbr2742z 사용자 매뉴얼
20
When either the F.F or REW button is pressed in the
PLAYBACK mode, the speed search picture will appear.
When pressed twice, the search picture will increase
speed. Speed search time depends upon the speed
used (SP, LP or SLP) during recording. See chart below.
To visually search backward or forward, press the REW
or F.F button once or twice in the PLAYBACK mode.
Press the PLAY button to resume normal viewing speed.
PLAYBACK mode, the speed search picture will appear.
When pressed twice, the search picture will increase
speed. Speed search time depends upon the speed
used (SP, LP or SLP) during recording. See chart below.
To visually search backward or forward, press the REW
or F.F button once or twice in the PLAYBACK mode.
Press the PLAY button to resume normal viewing speed.
SPEED SEARCH TIMES
NOTES:
•
"SP" is more appropriate as less noise
appeared during search and still playback for
tape recorded in SP.
appeared during search and still playback for
tape recorded in SP.
•
The audio output is muted during Speed
Search and Still.
Search and Still.
•
A few noise bars will appear on the TV screen
during Speed Search and Still.
during Speed Search and Still.
•
To prevent damage to the tape, Still and Speed
Search mode is automatically changed to the
Playback mode after 5 minutes.
Search mode is automatically changed to the
Playback mode after 5 minutes.
Press the PAUSE/STILL button in the PLAYBACK mode.
Press the PLAY button or PAUSE/STILL button to resume
normal playback.
Press the PLAY button or PAUSE/STILL button to resume
normal playback.
Press the CS button in the PLAY mode. The VCR will search
forward through approximately 30 seconds of the tape (e.g.
unwanted commercial time) for each press of the CS button
(maximum six presses) and then resume normal playback.
forward through approximately 30 seconds of the tape (e.g.
unwanted commercial time) for each press of the CS button
(maximum six presses) and then resume normal playback.
1
Load a cassette tape with the erase prevention tab
intact.
intact.
2
Press the SPEED button to
select the desired tape speed
SP or SLP. The counter and SP
or SLP will appear on the screen
about 4 seconds.
select the desired tape speed
SP or SLP. The counter and SP
or SLP will appear on the screen
about 4 seconds.
3
Set the TV/CATV option to the appropriate position
(See page 15).
(See page 15).
00:00:00 SP
NOTES: • If power is switched off during recording,
the TV set goes off and the VCR continues
to record. Press the STOP button to halt
the recording and turn off the VCR.
to record. Press the STOP button to halt
the recording and turn off the VCR.
• The TV/VCR Channel cannot be changed
during recording.
CH 012
Press the PAUSE/STILL button to avoid recording
unwanted material.
“
unwanted material.
“
” will appear on the screen and the Rec/Otr indicator
will blink on and off. Press the PAUSE/STILL button or
the REC/OTR button to continue the recording.
the REC/OTR button to continue the recording.
NOTE: The PAUSE mode will be changed to STOP mode
after five minutes to prevent damage to the tape.
Press the STOP button to stop recording.
“
“
■
” will appear on the screen.
NOTES: • AUTO REWIND FEATURE
This TV/VCR will automatically rewind the video
cassette when the tape has ended (except
during OTR and Timer Record). It will also eject
the video cassette.
cassette when the tape has ended (except
during OTR and Timer Record). It will also eject
the video cassette.
• If the erase prevention tab is removed, the tape
will eject when the REC/OTR button is pressed
for recording.
for recording.
SPECIAL PLAYBACK
TO VISUALLY SEARCH FOR DESIRED
POINTS
POINTS
PICTURE SEARCH SPEED
PRESS TWICE
TAPE SPEED
PRESS ONCE
SP (Standard Play)
LP (Long Play)
SLP (Super Long Play)
COMMERCIAL SKIP
TO WATCH STILL PICTURE
RECORDING A TV PROGRAM
RECORDING AND VIEWING THE
SAME TV PROGRAM
SAME TV PROGRAM
TV
- VHF/UHF channels
CATV - CABLE TV channels
4
Press the Direct Channel Selection buttons or CH.
▲
or
▼
button to select the channel to be recorded.
5
Press the REC/OTR button.
"
"
●
" and the channel number will
appear on the screen and the
REC/OTR indicator will light.
REC/OTR indicator will light.
TO STOP RECORDING
TO STOP RECORDING TEMPORARILY
PRESS TWICE
PRESS ONCE
5 X
9 X
15 X
3 X
7 X
9 X
TAPE SPEED AND
RECORDING/PLAYBACK TIME
RECORDING/PLAYBACK TIME
You can select the two different tape speeds before
recording.
recording.
This VCR selects the playback tape speed SP,
LP (Long Play) or SLP automatically.
LP (Long Play) or SLP automatically.
TAPE SPEED
VIDEO CASSETTE TAPE
T120
SP
Standard Play
SLP
Super Long Play
2 hours
6 hours
2-2/3 hours
8 hours
T160
5D70201A E P18-25
6/24/02, 4:27 PM
20