ZyXEL p-2602r-d1a 사용자 설명서

P-2602R/RL-DxA Series User’s Guide

64

Chapter 4 VoIP Wizard And Example

4 Your ZyXEL Device will attempt to register your SIP account with your VoIP service 

provider. When your account is registered your PHONE 1 light will come on and you are 
ready to make and receive VoIP phone calls.

Figure 25   SIP Registration Test

5 This screen displays if SIP account registration fails. If your DSL cable was 

disconnected, you can try connecting it. Then wait a few seconds and click Register 
Again. If your Internet connection was already working, you can click Back and try re-
entering your SIP account settings. 

SIP Service Domain

Enter the SIP service domain name in this field (the domain name that 

comes after the @ symbol in a SIP account like 

11223344@SIPA-

Account.com

). You can use up to 127 ASCII Extended set characters.

User Name

This is the  name used to register this SIP account with the SIP register 

server. Type the user name exactly as it was given to you. You can use up 

to 95 ASCII characters.

Password

Type the password associated with the user name above. You can use up 

to 95 ASCII Extended set characters.

Check here to set up SIP2 

settings.

This screen configures SIP account 1. Select the check box if you have 

a second SIP account that you want to use. You will need to configure 

the same fields for the second SIP account.

Note: If you configure more than one SIP account, you need 

to configure Analog Phone settings in 

 to distinguish between the two accounts 

when you make and receive phone calls.

Back

Click Back to return to the previous screen.

Apply

Click Apply to complete the wizard setup and save your configuration.

Exit

Click Exit to close the wizard without saving your settings.

Table 12   VoIP Wizard Configuration