ZyXEL N4100 사용자 가이드

Chapter 6 Server

N4100 User’s Guide

selected, the SSL-client must send the N4100 a certificate. You must apply for a 
certificate for the browser from a CA.

Please refer to the following figure. 

HTTPS connection requests from an SSL-aware web browser go to port 443 (by 
default) on the N4100’s WS (web server).

HTTP connection requests from a web browser go to port 80 (by default) on the 
N4100’s WS (web server).  

Figure 33   HTTPS Implementation

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows 
individual clients to obtain TCP/IP configuration at start-up from a server. 

This N4100 has a built-in DHCP server capability that assigns IP addresses and 
DNS servers to systems that support DHCP client capability.

You can configure the N4100 as a DHCP server or disable it. When configured as a 
server, the N4100 provides the TCP/IP configuration for the clients. If you turn 
DHCP service off, you must have another DHCP server on your LAN, or else the 
computer must be manually configured. 

You can also configure the N4100 to relay client DHCP requests to a DHCP server 
and the server’s responses back to the clients. 

DNS (Domain Name System) maps a domain name to its corresponding IP 
address and vice versa. The DNS server is extremely important because without 
it, you must know the IP address of a computer before you can access it. The DNS