ZyXEL NBG-318S 사용자 가이드
Chapter 3 Connection Wizard
NBG-318S User’s Guide
48
Figure 17 Wizard Step 2: Wireless LAN
The following table describes the labels in this screen.
Table 10 Wizard Step 2: Wireless LAN
LABEL
DESCRIPTION
Name (SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
LAN.
If you change this field on the NBG-318S, make sure all wireless stations use the
If you change this field on the NBG-318S, make sure all wireless stations use the
same SSID in order to access the network.
Security
Select a Security level from the drop-down list box.
Choose Auto to have the NBG-318S generate a pre-shared key automatically. A
Choose Auto to have the NBG-318S generate a pre-shared key automatically. A
screen pops up displaying the generated pre-shared key after you click Next. Write
down the key for use later when connecting other wireless devices to your network.
Click OK to continue.
Choose None to have no wireless LAN security configured. If you do not enable any
Choose None to have no wireless LAN security configured. If you do not enable any
wireless security on your NBG-318S, your network is accessible to any wireless
networking device that is within range. If you choose this option, skip directly to
.
Choose Basic (WEP) security if you want to configure WEP Encryption parameters. If
Choose Extend (WPA-PSK or WPA2-PSK) security to configure a Pre-Shared Key.
Choose this option only if your wireless clients support WPA-PSK or WPA2-PSK
respectively. If you choose this option, skip directly to
Channel
Selection
The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a
channel.
Select a channel that is not used by any nearby devices.
Select a channel that is not used by any nearby devices.
Back
Click Back to display the previous screen.
Next
Click Next to proceed to the next screen.
Exit
Click Exit to close the wizard screen without saving.
"
The wireless stations and NBG-318S must use the same SSID, channel ID
and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is
enabled) or WPA2-PSK (if WPA2-PSK is enabled) for wireless
communication.
and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is
enabled) or WPA2-PSK (if WPA2-PSK is enabled) for wireless
communication.