ZyXEL 2WG 사용자 가이드
Chapter 4 Tutorial
ZyWALL 2WG User’s Guide
108
4.2.2 Configuring the WAN Connection with a Static IP Address
The following table shows the information your ISP gave you for Internet connection.
Follow the steps below to configure your ZyWALL for Internet access using PPPoE in this
example.
example.
Figure 44 Tutorial Example: WAN Connection with a Static Public IP Address
1 Click NETWORK > WAN > WAN 1.
2 Select PPPoE (PPP over Ethernet) from the Encapsulation drop-down list box.
3 In the ISP Parameters for Internet Access section, enter the information (such as the
2 Select PPPoE (PPP over Ethernet) from the Encapsulation drop-down list box.
3 In the ISP Parameters for Internet Access section, enter the information (such as the
user name and password) provided by your ISP. If your ISP didn’t give you the service
name, leave the field blank.
name, leave the field blank.
4 In the WAN IP Address Assignment section, select Use Fixed IP Address and enter
the first fixed public IP address (1.2.3.4 in this example).
5 Click Apply.
Encapsulation
PPPoE
Public IP Addresses
1.2.3.4
1.2.3.5
1.2.3.6
1.2.3.7
1.2.3.5
1.2.3.6
1.2.3.7
Gateway IP Address
1.2.3.89
Subnet Mask
255.255.255.0
User Name
exampleuser
Password
abcd1234
DNS Server
1.2.1.1
1.2.1.2
1.2.1.2