ZyXEL 2WG 사용자 가이드
Chapter 8 WAN and 3G Screens
ZyWALL 2WG User’s Guide
193
8.5 The Traffic Redirect Screen
Traffic redirect forwards WAN traffic to a backup gateway when the ZyWALL cannot connect
to the Internet through its normal gateway. Connect the backup gateway on the WAN so that
the ZyWALL still provides firewall protection for the LAN.
to the Internet through its normal gateway. Connect the backup gateway on the WAN so that
the ZyWALL still provides firewall protection for the LAN.
Figure 119 Traffic Redirect WAN Setup
Reset time and
data budget
counters
This button is available only when you enable budget control in this screen.
Click this button to reset the time and data budgets immediately. The count starts
Click this button to reset the time and data budgets immediately. The count starts
over with the 3G connection’s full configured monthly time and data budgets. This
does not affect the normal monthly budget restart.
Actions when
over budget
Specify the actions the ZyWALL takes when the time or data limit is exceeded.
Select Log to create a log.
Select Alert to create an alert.
If you select Log, you can also select recurring every to have the ZyWALL send a
Select Log to create a log.
Select Alert to create an alert.
If you select Log, you can also select recurring every to have the ZyWALL send a
log (and alert if selected) for this event periodically. Specify how often (from 1 to
65535 minutes) to send the log (and alert if selected).
Select Allow to permit new 3G connections or Disallow to drop/block new 3G
Select Allow to permit new 3G connections or Disallow to drop/block new 3G
connections.
Select Keep to maintain the existing 3G connection or Drop to disconnect it.
You cannot select Allow and Drop at the same time.
If you select Disallow and Keep, the ZyWALL allows you to transmit data using the
Select Keep to maintain the existing 3G connection or Drop to disconnect it.
You cannot select Allow and Drop at the same time.
If you select Disallow and Keep, the ZyWALL allows you to transmit data using the
current connection, but you cannot build a new connection if the existing
connection is disconnected.
Actions when
over % of time
budget or % of
data budget
Specify the actions the ZyWALL takes when the specified percentage of time
budget or data limit is exceeded. Enter a number from 1 to 99 in the percentage
fields. If you change the value after you configure and enable budget control, the
ZyWALL resets the statistics.
Select Log to create a log.
Select Alert to create an alert.
If you select Log, you can also select recurring every to have the ZyWALL send a
Select Log to create a log.
Select Alert to create an alert.
If you select Log, you can also select recurring every to have the ZyWALL send a
log (and alert if selected) for this event periodically. Specify how often (from 1 to
65535 minutes) to send the log (and alert if selected).
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to begin configuring this screen afresh.
Table 41 NETWORK > WAN > 3G (WAN 2) (continued)
LABEL
DESCRIPTION