ZyXEL 2WG 사용자 가이드
Chapter 10 WLAN Screens
ZyWALL 2WG User’s Guide
214
• Use the Port Roles screen (
) to set a port to be part of the WLAN
and connect an Access Point (AP) to the WLAN interface to extend the ZyWALL’s
wireless LAN coverage.
wireless LAN coverage.
10.1.2 What You Need to Know About Wireless LAN
DHCP
Like the LAN, the ZyWALL can also assign TCP/IP configuration via DHCP to computers
connected to the WLAN ports.
connected to the WLAN ports.
IP alias
IP alias allows you to partition a physical network into different logical networks over the
same Ethernet interface. See
same Ethernet interface. See
for more information on IP alias.
Port roles
Use port roles to set ports as part of the LAN, DMZ and/or WLAN interface. See
Finding Out More
See
10.2 The WLAN Screen
The built-in wireless card is used as part of the LAN by default. You can use the Port Roles
screen (see
screen (see
) to set a port to be part of the WLAN. Then connect an
access point (AP) to it to extend the ZyWALL’s wireless LAN coverage. See
if you need to configure a 3G connection (a 3G connection is for Internet access
instead of providing a local wireless LAN).
Click NETWORK > WLAN to open the WLAN screen to configure the IP address for
ZyWALL’s WLAN interface, other TCP/IP and DHCP settings.
Click NETWORK > WLAN to open the WLAN screen to configure the IP address for
ZyWALL’s WLAN interface, other TCP/IP and DHCP settings.