ZyXEL 2WG 사용자 가이드

Chapter 11 Wi-Fi Screens

ZyWALL 2WG User’s Guide

Figure 142   WIRELESS > Wi-Fi > Security: WEP

The following table describes the labels in this screen. 

Click the WIRELESS > Wi-Fi > Security > Edit. Select 8021X-Only from the Security 
Mode list.

Table 60   WIRELESS > Wi-Fi > Security: WEP  

Name

Type a name to identify this security profile.

Security Mode Select WEP from the drop-down list.

WEP 

Encryption

WEP (Wired Equivalent Privacy) provides data encryption to prevent unauthorized 

wireless stations from accessing data transmitted over the wireless network. 

Select 64-bit WEP, 128-bit WEP or 152-bit WEP to enable data encryption.  

Authentication 

Method

Select Shared-Key to have the ZyWALL use the default WEP key to authenticate the 

wireless client to the ZyWALL.
Select Auto to have the ZyWALL switch between the shared-key and open system 

(the wireless clients and AP do not share a secret key for authentication) modes 

automatically.
The default setting is Auto. 

Key 1 to Key 4 The WEP keys are used to encrypt data. Both the ZyWALL and the wireless clients 

must use the same WEP key for data transmission.
If you chose 64-bit WEP in the WEP Encryption field, then enter any 5 ASCII 

characters or 10 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
If you chose 128-bit WEP in the WEP Encryption field, then enter 13 ASCII 

characters or 26 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
If you chose 152-bit WEP in the WEP Encryption field, then enter 16 ASCII 

characters or 32 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
You can configure up to four keys, but only one key can be activated at any one time. 

The default key is key 1.

Apply

Click Apply to save your customized settings and exit this screen.

Cancel

Click Cancel to exit this screen without saving.