ZyXEL 2WG 사용자 가이드
Chapter 18 Network Address Translation (NAT) Screens
ZyWALL 2WG User’s Guide
382
18.3 The NAT Address Mapping Screen
Click ADVANCED > NAT > Address Mapping to open the following screen.
Use this screen to change your ZyWALL’s address mapping settings.
Ordering your rules is important because the ZyWALL applies the rules in the order that you
specify. When a rule matches the current packet, the ZyWALL takes the corresponding action
and the remaining rules are ignored. If there are any empty rules before your new configured
rule, your configured rule will be pushed up by that number of empty rules. For example, if
you have already configured rules 1 to 6 in your current set and now you configure rule
number 9. In the set summary screen, the new rule will be rule 7, not 9. Now if you delete rule
4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new rules 4, 5 and 6.
specify. When a rule matches the current packet, the ZyWALL takes the corresponding action
and the remaining rules are ignored. If there are any empty rules before your new configured
rule, your configured rule will be pushed up by that number of empty rules. For example, if
you have already configured rules 1 to 6 in your current set and now you configure rule
number 9. In the set summary screen, the new rule will be rule 7, not 9. Now if you delete rule
4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new rules 4, 5 and 6.
Port Forwarding
Rules
The bar displays how many of the ZyWALL's possible port forwarding rules are
configured. The first number shows how many port forwarding rules are configured
on the ZyWALL. The second number shows the maximum number of port
forwarding rules that can be configured on the ZyWALL.
Port Triggering
Rules
The bar displays how many of the ZyWALL's possible trigger port rules are
configured. The first number shows how many trigger port rules are configured on
the ZyWALL. The second number shows the maximum number of trigger port rules
that can be configured on the ZyWALL.
Copy to WAN 2
(and Copy to
WAN 1)
Click Copy to WAN 2 (or Copy to WAN 1) to duplicate this WAN interface's NAT
port forwarding or trigger port rules on the other WAN interface.
Note: Using the copy button overwrites the other WAN interface's
existing rules.
The copy button is best suited for initial NAT configuration where you have
configured NAT port forwarding or trigger port rules for one interface and want to use
similar rules for the other WAN interface. You can use the other NAT screens to edit
the NAT rules after you copy them from one WAN interface to the other.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to begin configuring this screen afresh.
Table 114 ADVANCED > NAT > NAT Overview (continued)
LABEL
DESCRIPTION