ZyXEL 2WG 사용자 가이드
Chapter 27 Logs Screens
ZyWALL 2WG User’s Guide
484
"
Computers take turns using dynamically assigned LAN, DMZ or WLAN IP
addresses. The ZyWALL continues recording the bytes sent to or from a LAN,
DMZ or WLAN IP address when it is assigned to a different computer.
addresses. The ZyWALL continues recording the bytes sent to or from a LAN,
DMZ or WLAN IP address when it is assigned to a different computer.
Figure 305 LOGS > Traffic Statistics: Host IP Address Example
The following table describes the labels in this screen.
27.4.3 Viewing Protocol/Port
In the
Traffic Statistics
screen, select Protocol/Port from the Report Type drop-down list
box to have the ZyWALL record and display which protocols or service ports have been used
the most and the amount of traffic for the most used protocols or service ports.
the most and the amount of traffic for the most used protocols or service ports.
Table 157 LOGS > Traffic Statistics: Host IP Address
LABEL
DESCRIPTION
IP Address
This column lists the LAN, DMZ or WLAN IP addresses to and/or from which the
most traffic has been sent. The LAN, DMZ or WLAN IP addresses are listed in
descending order with the LAN, DMZ or WLAN IP address to and/or from which the
most traffic was sent listed first.
Direction
This field displays Incoming to denote traffic that is coming in from the WAN to the
LAN, DMZ or WLAN. This field displays Outgoing to denote traffic that is going out
from the LAN, DMZ or WLAN to the WAN.
Amount
This column displays how much traffic has gone to and from the listed LAN, DMZ or
WLAN IP addresses. The measurement unit shown (bytes, Kbytes, Mbytes or
Gbytes) varies with the amount of traffic sent to and from the LAN, DMZ or WLAN IP
address. The count starts over at 0 if the total traffic sent to and from a LAN, DMZ or
WLAN IP passes the bytes count limit (see