ZyXEL 2WG 사용자 가이드
Chapter 31 WAN and Dial Backup Setup
ZyWALL 2WG User’s Guide
549
Please note that the ordering of the sets is significant, i.e., starting from set 1, the ZyWALL
will wait until the ‘Expect’ string is matched before it proceeds to set 2, and so on for the rest
of the script. When both the ‘Expect’ and the ‘Send’ fields of the current set are empty, the
ZyWALL will terminate the script processing and start PPP negotiation. This implies two
things: first, the sets must be contiguous; the sets after an empty one are ignored. Second, the
last set should match the final message sent by the server. For instance, if the server prints:
will wait until the ‘Expect’ string is matched before it proceeds to set 2, and so on for the rest
of the script. When both the ‘Expect’ and the ‘Send’ fields of the current set are empty, the
ZyWALL will terminate the script processing and start PPP negotiation. This implies two
things: first, the sets must be contiguous; the sets after an empty one are ignored. Second, the
last set should match the final message sent by the server. For instance, if the server prints:
login successful.
Starting PPP...
Starting PPP...
after you enter the password, then you should create a third set to match the final “PPP...”
but without a “Send” string. Otherwise, the ZyWALL will start PPP prematurely right after
sending your password to the server.
If there are errors in the script and it gets stuck at a set for longer than the “Dial Timeout” in
menu 2 (default 60 seconds), the ZyWALL will timeout and drop the line. To debug a script,
go to Menu 24.4 to initiate a manual call and watch the trace display to see if the sequence of
messages and prompts from the server differs from what you expect.
sending your password to the server.
If there are errors in the script and it gets stuck at a set for longer than the “Dial Timeout” in
menu 2 (default 60 seconds), the ZyWALL will timeout and drop the line. To debug a script,
go to Menu 24.4 to initiate a manual call and watch the trace display to see if the sequence of
messages and prompts from the server differs from what you expect.
Figure 342 Menu 11.3.3: Remote Node Script
The following table describes the fields in this menu.
Menu 11.3.3 - Remote Node Script
Active= No
Set 1: Set 5:
Expect= Expect=
Send= Send=
Set 2: Set 6:
Expect= Expect=
Send= Send=
Set 3:
Expect=
Send=
Set 4:
Expect=
Send=
Expect= Expect=
Send= Send=
Set 2: Set 6:
Expect= Expect=
Send= Send=
Set 3:
Expect=
Send=
Set 4:
Expect=
Send=
Enter here to CONFIRM or ESC to CANCEL:
Table 205 Menu 11.3.3: Remote Node Script
FIELD
DESCRIPTION
Active
Press [SPACE BAR] and then [ENTER] to select either Yes to enable the AT strings or
No to disable them.
Set 1-6:
Expect
Enter an Expect string to match. After matching the Expect string, the ZyWALL returns
the string in the Send field.
Set 1-6:
Send
Enter a string to send out after the Expect string is matched.