ZyXEL p-660h-61 사용자 가이드
Prestige 660H Series User’s Guide
28-2 Network
Address
Translation (NAT)
Figure 28-1 Applying NAT in Menus 4
The following figure shows how you apply NAT to the remote node in menu 11.1.
1.
Enter 11 from the main menu.
2.
When menu 11 appears, as shown in the following figure, type the number of the remote node that
you want to configure.
3.
Move the cursor to the Edit IP/Bridge field, press [SPACE BAR] to select Yes and then press
[ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= RFC 1483
Multiplexing= LLC-based
VPI #= 8
VCI #= 35
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= N/A
IP Address Assignment= Static
IP Address= 0.0.0.0
Network Address Translation= SUA Only
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel: