ZyXEL p-660h-61 사용자 가이드
Prestige 660H Series User’s Guide
28-8 Network
Address
Translation (NAT)
Table 28-4 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set
FIELD DESCRIPTION
EXAMPLE
Global IP
Start
This is the starting inside global IP address (IGA). If you have a dynamic IP,
enter 0.0.0.0 as the Global IP Start. Note that Global IP Start can be set to
0.0.0.0 only if the types are Many-to-One or Server.
enter 0.0.0.0 as the Global IP Start. Note that Global IP Start can be set to
0.0.0.0 only if the types are Many-to-One or Server.
0.0.0.0
End
This is the ending inside global IP address (IGA). This field is N/A for One-to-
One, Many-to-One and Server types.
One, Many-to-One and Server types.
N/A
Server
Mapping Set
Mapping Set
Only available when Type is set to Server. Type a number from 1 to 10 to
choose a server set from menu 15.2.
choose a server set from menu 15.2.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel”
to save your configuration or press [ESC] to cancel and go back to the previous screen.
to save your configuration or press [ESC] to cancel and go back to the previous screen.
28.4 Configuring a Server behind NAT
Follow these steps to configure a server behind NAT:
1.
Enter 15 in the main menu to go to Menu 15 - NAT Setup.
2.
Enter 2 to display Menu 15.2 - NAT Server Sets as shown next.
Figure 28-8 Menu 15.2 NAT Server Setup
3.
Enter 1 to go to Menu 15.2.1 NAT Server Setup as follows.
Menu 15.2 - NAT Server Sets
1. Server Set 1 (Used for SUA Only)
2. Server Set 2
3. Server Set 3
4. Server Set 4
5. Server Set 5
6. Server Set 6
7. Server Set 7
8. Server Set 8
9. Server Set 9
10. Server Set 10
Enter Set Number to Edit: