ZyXEL nbg-4615 사용자 가이드

 Chapter 28 Maintenance

NBG4615 User’s Guide

Note: If you select the incorrect System Operation Mode you may not be able to 

connect to the Internet.

Universal Repeater 
Mode

Select Universal Repeater Mode if you want to have wireless 
clients associate with the NBG4615 and also want to connect the 
NBG4615 to an existing access point.

• In addition to wireless LAN settings between the NBG4615 and 

wireless clients, you also need to configure security and 

wireless settings between the NBG4615 and another access 

point.

• WDS is not available when the NBG4615 is in Universal 

Repeater Mode.

• The IP address of the device on the local network is the same 

as the IP address given to the NBG4615 while in Access Point 

Mode (default is 192.168.1.2).

WISP Mode

Select WISP Mode if your device needs a wireless client to 
connect to an existing access point.

• You cannot configure Wireless LAN settings (including WPS) 

and scheduling in the WISP Mode.

• The IP address of the device on the local network is the same 

as the IP address given to the NBG4615 while in router mode 

(default is 192.168.1.1).

Apply

Click Apply to save your settings.

Cancel

Click Cancel to return your settings to the default (Router).

Table 86   Maintenance > Sys OP Mode (continued)