ZyXEL nbg-4615 사용자 가이드

NBG4615 User’s Guide

The following tables summarize the NBG4615’s hardware and firmware features.

Table 87   Hardware Features

Dimensions

162 mm (W) x 106 mm (D) x 28 mm (H)

Weight

285g

SDRAM

32 MB

Flash Memory

8 MB

Power Specification

Input: 100~240 AC, 50~60 Hz

Output: 12 V DC 1.5A

Ethernet ports

Auto-negotiating: 100 Mbps, 1000 Mbps in either half-duplex or 
full-duplex mode.

Auto-crossover: Use either crossover or straight-through Ethernet 
cables.

Built-in Switch

A combination of switch and router makes your NBG4615 a cost-
effective and viable network solution. You can add up to two 
computers to the NBG4615 without the cost of a hub when 
connecting to the Internet through the WAN port. You can add up 
to three computers to the NBG4615 when you connect to the 
Internet in AP mode. Add more than four computers to your LAN 
by using a hub.

LEDs

Power, LAN1-4, WAN, Internet/WPS, USB1-2

Reset button

The reset button is built into the rear panel. Use this button to 
restore the NBG4615 to its factory default settings. Press for 1 
second to restart the device. Press for 5 seconds to restore to 
factory default settings.

WPS button

Press the WPS on two WPS enabled devices within 120 seconds 
for a security-enabled wireless connection.

Power switch

Turn on or turn off the power of the NBG4615 using this switch.

WLAN switch

Turn on or turn off the wireless function of the NBG4615 using this 
switch. There is no need to go into the Web Configurator. 

Antenna

The NBG4615 is equipped with two 2dBi (2.4GHz) detachable 
antenna to provide clear radio transmission and reception on the 
wireless network. 

USB Port

The NBG4615 has two built-in USB 2.0 type A for USB device 
connectivity.