ZyXEL nbg-4615 사용자 가이드
Appendix A Product Specifications
NBG4615 User’s Guide
252
Be careful to avoid damaging pipes or cables located inside the
wall when drilling holes for the screws.
wall when drilling holes for the screws.
3
Do not insert the screws all the way into the wall. Leave a small gap of about 0.5
cm between the heads of the screws and the wall.
cm between the heads of the screws and the wall.
4
Make sure the screws are snugly fastened to the wall. They need to hold the
weight of the NBG4615 with the connection cables.
weight of the NBG4615 with the connection cables.
5
Align the holes on the back of the NBG4615 with the screws on the wall. Hang the
NBG4615 on the screws.
NBG4615 on the screws.
Figure 145 Wall-mounting Example
The following are dimensions of an M4 tap screw and masonry plug used for wall
mounting. All measurements are in millimeters (mm).
mounting. All measurements are in millimeters (mm).
Figure 146 Masonry Plug and M4 Tap Screw