ZyXEL nbg-4615 사용자 가이드
Chapter 8 Easy Mode
NBG4615 User’s Guide
70
8.6.7 WPS
Use this screen to add a wireless station to the network using WPS. Click WPS in
the Wireless Security to open the following screen.
the Wireless Security to open the following screen.
Figure 43 Wireless Security: WPS
The following table describes the labels in this screen.
Table 24 Wireless Security: WPS
LABEL
DESCRIPTION
Wireless
Security
Security
Click this to go back to the Wireless Security screen.
WPS
Create a secure wireless network simply by pressing a button.
The NBG4615 scans for a WPS-enabled device within the range and
performs wireless security information synchronization.
performs wireless security information synchronization.
Note: After you click the WPS button on this screen, you have to
press a similar button in the wireless station utility within 2
minutes. To add the second wireless station, you have to
press these buttons on both device and the wireless station
again after the first 2 minutes.
minutes. To add the second wireless station, you have to
press these buttons on both device and the wireless station
again after the first 2 minutes.
Register
Create a secure wireless network simply by entering a wireless client's
PIN (Personal Identification Number) in the NBG4615’s interface and
pushing this button.
PIN (Personal Identification Number) in the NBG4615’s interface and
pushing this button.
Type the same PIN number generated in the wireless station’s utility.
Then click Register to associate to each other and perform the wireless
security information synchronization.
Then click Register to associate to each other and perform the wireless
security information synchronization.
Exit
Click Exit to close this screen.