ZyXEL P-2602HW 사용자 설명서

 Chapter 12 VoIP Trunking

P-2602H(W)(L)-DxA User’s Guide

Each field is described in the following table.

Use this screen to set up outgoing authentication accounts for forwarding calls through peer 
devices (without proxy) and incoming authentication accounts for forwarding calls from peer 
devices. To access this screen, click VoIP > Trunking > Peer Call.

Table 68   VoIP > Trunking > General

Enable Trunking

Select this to turn on VoIP trunking on your ZyXEL Device.

Auto Attendant 

Timeout

This is the setting which determines how long the ZyXEL Device waits for a caller 

to enter a phone number when it receives the call. Enter the number of seconds 

before the Auto Attendant times out. The default value is 10 seconds and entering 

0 does not change the default. Enter a value from 1 to 255 seconds. 
When the auto attendant times out, the phone directly connected to the ZyXEL 

Device rings.

Dialing 

Interval(sec)

Enter the number of seconds the ZyXEL Device should wait after you stop dialing 

numbers before it makes the phone call. The value depends on how quickly you 

dial phone numbers. The default value is 3 seconds and entering 0 does not 

change the default. Enter a value from 1 to 255 seconds.

Enable Auto 

Attendant 

Authentication

Select this to enable authentication for calls coming into your ZyXEL Device. This 

is similar to enabling a PIN (Personal Identification Number) that callers must 

enter to forward calls via your ZyXEL Device.

Password

This is the PIN callers have to enter via their phone pad when dialing into your 

ZyXEL Device to forward calls through it. Enter a number between 1 and 32 digits 

long.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to reset the fields.