ZyXEL p-2302hw-p1 사용자 설명서

P-2302HW/HWL-P1 Series User’s Guide

Chapter 10 Phone

161

Figure 80   VoIP > Phone > Analog Phone > Advanced

Each field is described in the following table.

Table 66   VoIP > Phone > Analog Phone > Advanced

Analog Phone

This field displays the phone port you see in this screen.

Voice Volume 
Control

Speaking Volume

Enter the loudness that the ZyXEL Device uses for speech that it sends to the peer 
device. -1 is the quietest, and 1 is the loudest.

Listening Volume

Enter the loudness that the ZyXEL Device uses for speech that it receives from the 
peer device. -1 is the quietest, and 1 is the loudest.

Echo Cancellation

G.168 Active

Select this if you want to eliminate the echo caused by the sound of your voice 
reverberating in the telephone receiver while you talk.

Dialing Interval 
Select

Dialing Interval 
Select

Enter the number of seconds the ZyXEL Device should wait after you stop dialing 
numbers before it makes the phone call. The value depends on how quickly you 
dial phone numbers.

If you select Active Immediate Dial in VoIP > Phone > Common, you can press 
the pound key (#) to tell the ZyXEL Device to make the phone call immediately, 
regardless of this setting.

VAD Support

Select this if the ZyXEL Device should stop transmitting when you are not 
speaking. This reduces the bandwidth the ZyXEL Device uses.

<Back

Click this to return to the Analog Phone screen without saving your changes.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.