ZyXEL p-2302hwdl-p1 사용자 설명서

다운로드
페이지 128
 
 
Prestige 2302 Support Notes 
 
 
 
All contents copyright (c) 2005 ZyXEL Communications Corporation.   
14
 
Configure a PPTP server Behind SUA   
• 
Introduction 
PPTP  is  a  tunneling  protocol  defined  by  the  PPTP  forum  that  allows  PPP  packets  to  be  encapsulated  within 
Internet Protocol (IP) packets and forwarded over any IP network, including the Internet itself.   
In order to run the Windows 9x PPTP client, you must be able to establish an IP connection with a tunnel server 
such as the Windows NT Server 4.0 Remote Access Server.   
Windows Dial-Up Networking uses the Internet standard Point-to-Point (PPP) to provide a secure, optimized 
multiple-protocol  network  connection  over  dial-up  telephone  lines.  All  data  sent  over  this  connection  can  be 
encrypted  and  compressed,  and  multiple  network  level  protocols  (TCP/IP,  NetBEUI  and  IPX)  can  be  run 
correctly. Windows NT Domain Login level security is preserved even across the Internet.   
 
  Window98 PPTP Client / Internet / NT RAS Server Protocol Stack   
PPTP appears as new modem type   (Virtual Private Networking Adapter) that can be selected when setting up a 
connection in the Dial-Up Networking folder. The VPN Adapter type does not appear elsewhere in the system. 
Since  PPTP  encapsulates  its  data  stream  in  the  PPP  protocol,  VPN  requires  a  second  dial-up  adapter.  This 
second dial-up adapter for VPN is added during the installation phase of the Upgrade in addition to the first 
dial-up adapter that provides PPP support for the analog or ISDN modem.