ZyXEL p-2302hwdl-p1 사용자 설명서

 

All contents copyright (c) 2005 ZyXEL Communications Corporation.   

77

Use this field to set the loudness that the Prestige uses for the speech signal 

that it sends to the peer device. -1 is the quietest and 1 is the loudest. 

Use this field to set the loudness that the Prestige uses for the speech signal 

that it receives from the peer device and sends to your phone. -1 is the 

quietest and 1 is the loudest. 

SIP 1 and SIP 2 correspond to the Prestige’s SIP accounts. Select whether 

you want the phone(s) attached to this phone port to use SIP account 1, 2 or 

both when you make a call. If you select both SIP accounts, the Prestige will 

first try to use SIP account 2 and then SIP account 1 when you make a call. 

G.168 Active  Select this check box to cancel the echo caused by the sound of your voice 

reverberating in the telephone receiver while you talk. 

Select this check box to use Voice Activity Detection (VAD) to reduce the 

bandwidth that a call uses. The Prestige will generate and send comfort 

noise when you are not talking.   

When you are dialing a telephone number the Prestige waits this long after 

you stop pressing the buttons before initiating the call. Select how many 

seconds you want the Prestige to wait after the last input on the telephone’s 

keypad before dialing (making) a call.   

Click Apply to save your changes back to the Prestige.   

Click Reset to begin configuring this screen afresh. 

 

 

 

 

You can configure up to 10 SIP phone number in the Prestige＇s phone book for speed dialing.