ZyXEL p-2302hwdl-p1 사용자 설명서

Prestige 2302 Support Notes

The

Road Runner

service is commonly used in the USA and it requires the user to "log in" to the service

provider network before Internet access is allowed. The most popular implementation is TAS (Toshiba

Authentication System) with a packet filtering firewall in the upstream direction. Before users are logged in,

they can send ICMP packets (that is, ping) to a remote host through the Internet. However, all outgoing

(upstream) TCP and UDP packets to the Internet are blocked. Thus users can access the local local DNS/login

server. Downstream packets (or packets from the Internet to the users) are not filtered or blocked.

With

Standard

service, no user login is required. This is commonly used with a cable modem. The Prestige

supports both

Road Runner and Standard

services in SMT menu 4 for connecting to the ISPs for Internet

connection.

Yes, it is possible because Prestige delivers the packet to the local server by looking up to a SUA server table.

Therefore, to make a local server accessible to the outside users, the port number and the inside IP address of

the server must be configured in SMT Menu 15 -

SUA Server Setup

The Prestige supports DHCP client on the WAN port and DHCP server on the LAN port. The Prestige's DHCP

client allows it to get a public WAN IP address from the ISP automatically if your ISP uses DHCP as a method

to assign IP addresses. The Prestige's internal DHCP server allows it to automatically assign IP and DNS server

addresses to clients on the local LAN.

How do I use the reset button? And which parameter will be reset by the reset button?

Use a sharp pointed object to press the reset button located near the power connector. Press and hold down the

button for about five seconds to reset the device. All device settings, including the login password and IP

address, will be reset to the factory defaults.

The default IP address is 192.168.1.1 and the default login password is 1234.