ZyXEL nbg-334w 사용자 가이드

Chapter 5 Wireless LAN

NBG334W User’s Guide

Figure 35   Network > Wireless LAN > General 

The following table describes the general wireless LAN labels in this screen.

See the rest of this chapter for information on the other labels in this screen. 

Select No Security to allow wireless stations to communicate with the access points without 
any data encryption. 

"

If you do not enable any wireless security on your NBG334W, your network is 
accessible to any wireless networking device that is within range.

Table 27   Network > Wireless LAN > General

Enable 

Wireless LAN

Click the check box to activate wireless LAN.

Name(SSID)

(Service Set IDentity) The SSID identifies the Service Set with which a wireless 

station is associated. Wireless stations associating to the access point (AP) must 

have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII 

characters) for the wireless LAN. 

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a station 

cannot obtain the SSID through scanning using a site survey tool.

Channel 

Selection

Set the operating frequency/channel depending on your particular region. 
Select a channel from the drop-down list box. The options vary depending on 

whether you are using A or B/G frequency band and the country you are in. 
Refer to the Connection Wizard chapter for more information on channels.

Operating 

Channel 

This displays the channel the NBG334W is currently using.

Apply

Click Apply to save your changes back to the NBG334W.

Reset

Click Reset to reload the previous configuration for this screen.