ZyXEL NBG-417N 사용자 설명서

 Chapter 4 Connection Wizard

NBG-417N User’s Guide

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC 
address is assigned at the factory and consists of six pairs of hexadecimal 
characters, for example, 00:A0:C5:00:00:02.

This screen allows users to configure the WAN port's MAC address by either using 
the NBG-417N’s MAC address, copying the MAC address from a computer on your 
LAN or manually entering a MAC address. Once it is successfully configured, the 
address will be copied to configuration file. It is advisable to clone the MAC 
address from a computer on your LAN even if your ISP does not presently require 
MAC address authentication.

Figure 21   Wizard Step 3: WAN MAC Address

The following table describes the fields in this screen.

Table 17   Example of Network Properties for LAN Servers with Fixed IP Addresses

Choose an IP address

192.168.1.2-192.168.1.32; 192.168.1.65-192.168.1.254.

Subnet mask 

255.255.255.0

Gateway (or default route)

192.168.1.1(NBG-417N LAN IP)

Table 18   Wizard Step 3: WAN MAC Address

Factory Default

Select Factory Default to use the factory assigned default MAC 
address.

Clone the 
computer’s MAC 
address

Select this option and enter the IP address of the computer on the 
LAN whose MAC you are cloning. It is advisable to clone the MAC 
address from a computer on your LAN even if your ISP does not 
presently require MAC address authentication. 

Set WAN MAC 
Address

Select this option and enter the MAC address you want to use.

Back

Click Back to return to the previous screen.

Next

Click Next to continue. 

Exit

Click Exit to close the wizard screen without saving.