ZyXEL NBG-417N 사용자 설명서

 Chapter 7 Wireless LAN

NBG-417N User’s Guide

Click Network > Wireless LAN to display the General screen. Select WPA-PSK 
or WPA2-PSK from the Security Mode list.

Figure 45   Network > Wireless LAN > General: WPA-PSK/WPA2-PSK

Hex

Select this option in order to enter hexadecimal characters as a WEP key. 

The preceding "0x", that identifies a hexadecimal key, is entered 
automatically.

Key 1 to Key 
4

The WEP keys are used to encrypt data. Both the NBG-417N and the 
wireless stations must use the same WEP key for data transmission.

If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 
hexadecimal characters ("0-9", "A-F").

If you chose 128-bit WEP, then enter 13 ASCII characters or 26 
hexadecimal characters ("0-9", "A-F"). 

You must configure at least one key, only one key can be activated at any 
one time. The default key is key 1.

Apply

Click Apply to save your changes back to the NBG-417N.

Reset

Click Reset to reload the previous configuration for this screen.

Table 26   Network > Wireless LAN > General: Static WEP