ZyXEL NBG-416N 사용자 가이드
Chapter 8 WAN
NBG-416N User’s Guide
86
The following table describes the labels in this screen.
Table 33 Network > WAN > Internet Connection: Ethernet Encapsulation
LABEL
DESCRIPTION
ISP Parameters for Internet Access
Connection Type You must choose the Ethernet option when the WAN port is used as a
Connection Type You must choose the Ethernet option when the WAN port is used as a
regular Ethernet.
WAN IP Address Assignment
Get
automatically
from ISP
Get
automatically
from ISP
Select this option If your ISP did not assign you a fixed IP address. This
is the default selection.
is the default selection.
Use fixed IP
Address
Address
Select this option If the ISP assigned a fixed IP address.
IP Address
Enter your WAN IP address in this field if you selected Use Fixed IP
Address.
Address.
IP Subnet
Mask
Enter the IP Subnet Mask in this field.
Gateway IP
Address
Enter a Gateway IP Address (if your ISP gave you one) in this field.
MTU Auto
Select Auto if you want to have the Maximum Transmission Unit (MTU)
automatically configured. Select Manual if you want to have enter the
MTU manually in the field below.
automatically configured. Select Manual if you want to have enter the
MTU manually in the field below.
MTU
Enter the MTU or the largest packet size per frame that your NBG-416N
can receive and process.
can receive and process.
DNS Servers
First DNS Server
First DNS Server
Second DNS
Server
Server
Select From ISP if your ISP dynamically assigns DNS server
information (and the NBG-416N’s WAN IP address). The field to the
right displays the (read-only) DNS server IP address that the ISP
assigns.
information (and the NBG-416N’s WAN IP address). The field to the
right displays the (read-only) DNS server IP address that the ISP
assigns.
Select User-Defined if you have the IP address of a DNS server. Enter
the primary and secondary DNS server's IP address in the fields to the
right.
the primary and secondary DNS server's IP address in the fields to the
right.
WAN MAC
Address
Address
The MAC address section allows users to configure the WAN port's MAC
address by either using the NBG-416N’s MAC address, copying the MAC
address from a computer on your LAN or manually entering a MAC
address.
address by either using the NBG-416N’s MAC address, copying the MAC
address from a computer on your LAN or manually entering a MAC
address.
Factory default
Select Factory default to use the factory assigned default MAC
Address.
Address.
Clone the
computer’s MAC
address - IP
Address
computer’s MAC
address - IP
Address
Select Clone the computer's MAC address - IP Address and enter
the IP address of the computer on the LAN whose MAC you are cloning.
Once it is successfully configured, the address will be copied to the rom
file. It will not change unless you change the setting or upload a
different ROM file.
the IP address of the computer on the LAN whose MAC you are cloning.
Once it is successfully configured, the address will be copied to the rom
file. It will not change unless you change the setting or upload a
different ROM file.
Set WAN MAC
Address
Address
Select this option and enter the MAC address you want to use.
Apply
Click Apply to save your changes back to the NBG-416N.
Reset
Click Reset to begin configuring this screen afresh.