ZyXEL p-320w 사용자 가이드

P-320W User’s Guide

Chapter 2 Introducing the Web Configurator

41

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual 
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige 
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP 
configuration for the clients. If DHCP service is disabled, you must have another DHCP server 
on your LAN, or else the computer must be manually configured.

Click the DHCP Table (Detail) hyperlink in the Status screen. Read-only information here 
relates to your DHCP status. The DHCP table shows current DHCP client information 
(including IP Address, Host Name and MAC Address) of all network clients using the 
Prestige’s DHCP server.

Figure 9   Summary: DHCP Table

The following table describes the labels in this screen.

Table 5   Summary: DHCP Table 

# 

This is the index number of the host computer. 

IP Address

This field displays the IP address relative to the # field listed above.

Host Name 

This field displays the computer host name.

MAC Address

This field shows the MAC address of the computer with the name in the Host Name 

field. 
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC 

address is assigned at the factory and consists of six pairs of hexadecimal characters, 

for example, 00:A0:C5:00:00:02.

Refresh

Click Refresh to renew the screen. 

Tools

Firmware

Use this screen to upload firmware to your Prestige.

Configuration

Use this screen to backup and restore the configuration or reset the factory 

defaults to your Prestige. 

Restart

This screen allows you to reboot the Prestige without turning the power off.

Table 4   Screens Summary