ZyXEL p-320w 사용자 가이드

P-320W User’s Guide

68 

Chapter 4 Wireless LAN

Figure 30   WPA-PSK Authentication

In order to configure and enable WPA-PSK Authentication; click the Wireless LAN link 
under Network to display the General screen. Select WPA-PSK from the Security Mode 
list.

Figure 31   Wireless: WPA-PSK

The following table describes the labels in this screen.

Table 23   Wireless: WPA-PSK

Pre-Shared Key 

The encryption mechanisms used for WPA and WPA-PSK are the same. The only 

difference between the two is that WPA-PSK uses a simple common password, 

instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including 

spaces and symbols).

Apply

Click Apply to save your changes back to the Prestige.

Reset

Click Reset to reload the previous configuration for this screen.