ZyXEL 793H 사용자 가이드

Chapter 7 Network Address Translation (NAT) Screens

P-793H User’s Guide

Use this screen to edit a port forwarding rule. Click the rule’s edit icon in the Port 
Forwarding screen to display the screen shown next. 

Figure 49   NAT > Port Forwarding > Edit

The following table describes the fields in this screen. 

Modify

Click the edit icon to go to the screen where you can edit the port forwarding rule.
Click the delete icon to delete an existing port forwarding rule. Note that 

subsequent rules move up by one when you take this action.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to return to the previous configuration.

Table 32   NAT > Port Forwarding (continued)

Table 33   NAT > Port Forwarding > Edit

Active

Click this check box to enable the rule.

Service Name

Enter a name to identify this port-forwarding rule.

Start Port 

Enter a port number in this field. 
To forward only one port, enter the port number again in the End Port field. 
To forward a series of ports, enter the start port number here and the end port 

number in the End Port field.

End Port 

Enter a port number in this field. 
To forward only one port, enter the port number again in the Start Port field above 

and then enter it again in this field. 
To forward a series of ports, enter the last port number in a series that begins with 

the port number in the Start Port field above.

Server IP 

Address

Enter the inside IP address of the server here.

Back

Click Back to return to the previous screen.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to begin configuring this screen afresh.