ZyXEL 793H 사용자 가이드

Chapter 13 Bandwidth Management

P-793H User’s Guide

See 

 for background information. Use this screen to configure a 

bandwidth management rule. Use bandwidth rules to allocate specific amounts of bandwidth 
capacity (bandwidth budgets) to specific applications and/or subnets. To open this screen, 
click the Edit icon or select User define in the Service field 

Figure 96   Bandwidth MGMT > Rule Setup > Add/Edit

The following table describes the labels in this screen. 

Table 69   Bandwidth MGMT > Rule Setup > Add/Edit

Rule Configuration

Active

Select this check box to have the ZyXEL Device apply this bandwidth 

management rule. 
Enable a bandwidth management rule to give traffic that matches the rule 

priority over traffic that does not match the rule.
Enabling a bandwidth management rule also allows you to control the maximum 

amounts of bandwidth that can be used by traffic that matches the rule.

Rule Name 

Use the auto-generated name or enter a descriptive name of up to 20 

alphanumeric characters, including spaces.

BW Budget

Specify the maximum bandwidth allowed for the rule in kbps. The 

recommendation is a setting between 20 kbps and 20000 kbps for an individual 

rule.

Priority

Select a priority from the drop down list box. Choose High, Mid or Low. 

Use All Managed 

Bandwidth

Select this option to allow a rule to borrow unused bandwidth on the interface. 
Bandwidth borrowing is governed by the priority of the rules. That is, a rule with 

the highest priority is the first to borrow bandwidth. Do not select this if you want 

to leave bandwidth available for other traffic types or if you want to restrict the 

amount of bandwidth that can be used for the traffic that matches this rule.

Filter Configuration