ZyXEL 793H 사용자 가이드

P-793H User’s Guide

Use this menu to configure SNMP. See 

 for more information about 

SNMP.

To configure SNMP, enter 22 from the main menu to display Menu 22 - SNMP 
Configuration as shown next. The “community” for Get, Set and Trap fields is SNMP 
terminology for password.

Figure 200   Menu 22: SNMP Configuration

The following table describes the SNMP configuration parameters.

                          Menu 22 - SNMP Configuration

                  SNMP:
                    Get Community= public
                    Set Community= public
                    Trusted Host= 0.0.0.0
                    Trap:
                      Community= public
                      Destination= 0.0.0.0

Table 118   Menu 22: SNMP Configuration

Get Community Type the Get community, which is the password for the incoming Get- and GetNext 

requests from the management station.

Set Community Type the Set community, which is the password for incoming Set requests from the 

management station. 

Trusted Host

If you enter a trusted host, your ZyXEL Device will only respond to SNMP messages 

from this address. A blank (default) field means your ZyXEL Device will respond to 

all SNMP messages it receives, regardless of source.

Trap

Community

Type the Trap community, which is the password sent with each trap to the SNMP 

manager. 

Destination

Type the IP address of the station to send your SNMP traps to.

When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or 

[ESC] to cancel” to save your configuration or press [ESC] to cancel and go back to the previous 

screen.