ZyXEL 793H 사용자 가이드

 Chapter 6 LAN Setup

P-793H User’s Guide

Use this screen to configure the DNS server information that the ZyXEL Device sends to the 
DHCP client devices on the LAN.

Figure 40   LAN > DHCP Setup

The following table describes the labels in this screen.

Apply

Click Apply to save the changes. 

Cancel

Click Cancel to begin configuring this screen afresh.

Table 25   LAN > IP > Advanced Setup (continued)

Table 26   LAN > DHCP Setup

DHCP Setup

DHCP

Select what type of DHCP services the ZyXEL Device provides to the network. 

Choices are:
None - the ZyXEL Device does not provide any DHCP services. There is 

already a DHCP server on the network.
Relay - the ZyXEL Device routes DHCP requests to the DHCP server. There 

may be a DHCP server on another network.
Server - the ZyXEL Device assigns IP addresses and provides subnet mask, 

gateway, and DNS server information to the network. The ZyXEL Device is the 

DHCP server for the network.

IP Pool Starting 

Address

This field is enabled if the ZyXEL Device is a Server. Enter the first of the 

contiguous addresses in the IP address pool.

Pool Size

This field is enabled if the ZyXEL Device is a Server. Enter the size of, or the 

number of addresses in, the IP address pool.

Remote DHCP 

Server

This field is enabled if the ZyXEL Device is a Relay. Enter the IP address of the 

DHCP server to which the ZyXEL Device should route requests.

DNS Server

DNS Servers 

Assigned by DHCP 

Server

The ZyXEL Device passes a DNS (Domain Name System) server IP address to 

the DHCP clients.