ZyXEL p-662h-61 사용자 가이드

Prestige 662HW Series User’s Guide

Chapter 8 Wireless LAN Setup

94

Click Wireless LAN, Wireless to open the Wireless screen.

Figure 26   Wireless LAN

The following table describes the fields in this screen.

Table 17   Wireless LAN

Enable Wireless 
LAN

The wireless LAN is turned off by default, before you enable the wireless LAN you 
should configure some security by setting MAC filters and/or 802.1x security; 
otherwise your wireless LAN will be vulnerable upon enabling it. Select the check 
box to enable the wireless LAN.

ESSID

The ESSID (Extended Service Set Identification) is a unique name to identify the 
Prestige in the wireless LAN. Wireless stations associating to the Prestige must 
have the same ESSID. 

Enter a descriptive name (up to 32 characters).

Hide ESSID

Select Yes to hide the ESSID in so a station cannot obtain the ESSID through 
passive scanning. 

Select No to make the ESSID visible so a station can obtain the ESSID through 
passive scanning. 

Channel ID 

The radio frequency used by IEEE 802.11b wireless devices is called a channel. 

Select a channel from the drop-down list box.

RTS/CTS 
Threshold

The RTS (Request To Send) threshold (number of bytes) for enabling RTS/CTS 
handshake. Data with its frame size larger than this value will perform the RTS/CTS 
handshake. Setting this attribute to be larger than the maximum MSDU (MAC 
service data unit) size turns off the RTS/CTS handshake. Setting this attribute to 
zero turns on the RTS/CTS handshake. 

Enter a value between 0 and 2432.